Find Parts for Your Vehicle
Search

This product does not fit your vehicle. Update your vehicle

Fits these Vehicles

  • 2003-2009 Lexus GX470
  • 2003-2009 Toyota 4Runner
  • 2007-2009 Toyota FJ Cruiser
  • 2007-2013 Lincoln Navigator

Fits these Vehicles

  • 2003-2009 Lexus GX470
  • 2003-2009 Toyota 4Runner
  • 2007-2009 Toyota FJ Cruiser
  • 2007-2013 Lincoln Navigator
Bilstein Toyota 4Runner 4X4; '03-'09; Fr; B8 For Lexus Gx470, Toyota 4Runner, Toyota Fj Cruiser Bilstein Toyota 4Runner 4X4; '03-'09; Fr; B8 For Lexus Gx470, Toyota 4Runner, Toyota Fj Cruiser BILSTEIN Bilstein B8 8112 (ZoneControl) CR suspension kits are a direct fit, position sensitive coilover designed for light trucks and SUV’s. ZoneControl CR is a revolutionary technology delivering position sensitive damping. The system incorporates a triple piston design, offering 3 stages of compression valving and 2 stages of rebound valving. The coilover module utilizes a threaded spring seat for ride height adjustability ranging from 0-3.8” (depending on application). The coilover is supplied with a remote reservoir for increased cooling and an accompanied, bolt-on anodized reservoir chassis mount. BILSTEIN B8 8112 (ZoneControl) CR position sensitive coilovers will offer unparalleled ride comfort during every day driving combined with maximum control over large suspension inputs. Downloads Warranty Specifications Type: Nitrogen Gas Charged With Coil Spring: Yes Internal Design: Monotube Adjustable: No Extended Length (IN): 22.8 Inch Compressed Length (IN): 17.99 Inch Upper Mounting Style: Stud Lower Mounting Style: Eyelet Quantity: Single Body Material: Steel With Reservoir: Yes Includes Dust Shield: No Includes Hardware: No Includes Boot: No Estimated Install Time (Hours): 0.5 Other Features ZoneControl ® CR: Position Sensitive Damping With 3 Compression Zones And 2 Rebound Zones, Controlled By 3 Independent Pistons Compression ©: Provides Superior Bottom Out Control Through A 2-Stage, Telescoping Internal Compression Stop This Feature Eliminates The Need For An External Hydraulic Bump Stop Rebound ®: Secondary Rebound Stop Will Dissipate Spring Energy And Stabilize The Suspension Directly Following A Large Compression Event Triple Piston Design Delivers Comfort During Every Day Driving Conditions And Maximum Control Under Large Suspension Inputs Adjustable Threaded Spring Seat Allows For Fine-Tuned Ride Height Adjustable Range 06 To 25 Inch, 60mm Remote Reservoir For Increased Oil Capacity And Cooling Vehicle Specific Design And Tuning Provides The Ultimate Driving Experience Aerospace Quality Components Are Vehicle Specific To Optimize Wheel Travel And Clearance High Quality Chrome 5/8 Inch Heim Joint Mounting With Rubber Sealed Misalignment Spacers Offer The Most Durable, Load Bearing Mount Solution Aluminum Components With Zinc Plated Shock Bodies Will Resist Harsh Off-Road Elements And Factory Rebuildable Coilover Supplied As A Complete Module For Easy Installation, Spring Is Pre-Loaded To The Factory Recommended Ride Height Limited 2 Year Warranty

Bilstein Toyota 4Runner 4X4; '03-'09; Fr; B8 For Lexus Gx470, Toyota 4Runner, Toyota Fj Cruiser

Part Number : 41284834
Bilstein Toyota 4Runner 4X4; '03-'09; Fr; B8 For Lexus Gx470, Toyota 4Runner, Toyota Fj Cruiser

Bilstein B8 8112 (ZoneControl) CR suspension kits are a direct fit, position sensitive coilover designed for light trucks and SUV’s. ZoneControl CR is a revolutionary technology delivering position sensitive damping. The system incorporates a triple piston design, offering 3 stages of compression valving and 2 stages of rebound valving. The coilover module utilizes a threaded spring seat for ride height adjustability ranging from 0-3.8” (depending on application). The coilover is supplied with a remote reservoir for increased cooling and an accompanied, bolt-on anodized reservoir chassis mount. BILSTEIN B8 8112 (ZoneControl) CR position sensitive coilovers will offer unparalleled ride comfort during every day driving combined with maximum control over large suspension inputs.
Downloads
Warranty

Specifications

  • Type: Nitrogen Gas Charged
  • With Coil Spring: Yes
  • Internal Design: Monotube
  • Adjustable: No
  • Extended Length (IN): 22.8 Inch
  • Compressed Length (IN): 17.99 Inch
  • Upper Mounting Style: Stud
  • Lower Mounting Style: Eyelet
  • Quantity: Single
  • Body Material: Steel
  • With Reservoir: Yes
  • Includes Dust Shield: No
  • Includes Hardware: No
  • Includes Boot: No
  • Estimated Install Time (Hours): 0.5

Other Features

  • ZoneControl ® CR: Position Sensitive Damping With 3 Compression Zones And 2 Rebound Zones, Controlled By 3 Independent Pistons
  • Compression ©: Provides Superior Bottom Out Control Through A 2-Stage, Telescoping Internal Compression Stop This Feature Eliminates The Need For An External Hydraulic Bump Stop
  • Rebound ®: Secondary Rebound Stop Will Dissipate Spring Energy And Stabilize The Suspension Directly Following A Large Compression Event
  • Triple Piston Design Delivers Comfort During Every Day Driving Conditions And Maximum Control Under Large Suspension Inputs
  • Adjustable Threaded Spring Seat Allows For Fine-Tuned Ride Height Adjustable Range 06 To 25 Inch, 60mm Remote Reservoir For Increased Oil Capacity And Cooling
  • Vehicle Specific Design And Tuning Provides The Ultimate Driving Experience Aerospace Quality Components Are Vehicle Specific To Optimize Wheel Travel And Clearance
  • High Quality Chrome 5/8 Inch Heim Joint Mounting With Rubber Sealed Misalignment Spacers Offer The Most Durable, Load Bearing Mount Solution
  • Aluminum Components With Zinc Plated Shock Bodies Will Resist Harsh Off-Road Elements And Factory Rebuildable
  • Coilover Supplied As A Complete Module For Easy Installation, Spring Is Pre-Loaded To The Factory Recommended Ride Height
  • Limited 2 Year Warranty

Bilstein B8 8112 (ZoneControl) CR suspension kits are a direct fit, position sensitive coilover designed for light trucks and SUV’s. ZoneControl CR is a revolutionary technology delivering position sensitive damping. The system incorporates a triple piston design, offering 3 stages of compression valving and 2 stages of rebound valving. The coilover module utilizes a threaded spring seat for ride height adjustability ranging from 0-3.8” (depending on application). The coilover is supplied with a remote reservoir for increased cooling and an accompanied, bolt-on anodized reservoir chassis mount. BILSTEIN B8 8112 (ZoneControl) CR position sensitive coilovers will offer unparalleled ride comfort during every day driving combined with maximum control over large suspension inputs.
Downloads
Warranty

Specifications

  • Type: Nitrogen Gas Charged
  • With Coil Spring: Yes
  • Internal Design: Monotube
  • Adjustable: No
  • Extended Length (IN): 22.8 Inch
  • Compressed Length (IN): 17.99 Inch
  • Upper Mounting Style: Stud
  • Lower Mounting Style: Eyelet
  • Quantity: Single
  • Body Material: Steel
  • With Reservoir: Yes
  • Includes Dust Shield: No
  • Includes Hardware: No
  • Includes Boot: No
  • Estimated Install Time (Hours): 0.5

Other Features

  • ZoneControl ® CR: Position Sensitive Damping With 3 Compression Zones And 2 Rebound Zones, Controlled By 3 Independent Pistons
  • Compression ©: Provides Superior Bottom Out Control Through A 2-Stage, Telescoping Internal Compression Stop This Feature Eliminates The Need For An External Hydraulic Bump Stop
  • Rebound ®: Secondary Rebound Stop Will Dissipate Spring Energy And Stabilize The Suspension Directly Following A Large Compression Event
  • Triple Piston Design Delivers Comfort During Every Day Driving Conditions And Maximum Control Under Large Suspension Inputs
  • Adjustable Threaded Spring Seat Allows For Fine-Tuned Ride Height Adjustable Range 06 To 25 Inch, 60mm Remote Reservoir For Increased Oil Capacity And Cooling
  • Vehicle Specific Design And Tuning Provides The Ultimate Driving Experience Aerospace Quality Components Are Vehicle Specific To Optimize Wheel Travel And Clearance
  • High Quality Chrome 5/8 Inch Heim Joint Mounting With Rubber Sealed Misalignment Spacers Offer The Most Durable, Load Bearing Mount Solution
  • Aluminum Components With Zinc Plated Shock Bodies Will Resist Harsh Off-Road Elements And Factory Rebuildable
  • Coilover Supplied As A Complete Module For Easy Installation, Spring Is Pre-Loaded To The Factory Recommended Ride Height
  • Limited 2 Year Warranty