Here's What People Are Talking About this Bundle
★ ★ ★ ★ ★
Fits 2010 - Present MB Sprinter 2500!
"I installed these on a 2014 MB Sprinter 2500 4x2. These springs are 7.5” height, versus the recommended spring SSR-329-47 are only 6”. If you have sag, order these, as the SSR-329-47 won’t do anything for you. I ended up getting about 1.5” lift. So yes, these springs fit 2010 to present MB Sprinter 2500 4x2. You can see the 3” difference between the original springs and the SSR-330-47. SSR-329-47= 6” SSR-330-47=7.5”. Height is only difference."
— River Runner, Verified Purchase of the Sumo Springs SSR-329-47
★ ★ ★ ★ ★
Stops the sway and smooth out ride
"We are almost at max GVW in our 2012 Sprinter 170 and had a lot of sway in the back where most of our weight is. This made an epic difference going over large bumps on off road and sharp turns. The sway stops immediately instead of continuing like usual. An RV suspension shop suggested we do the rears before also doing the front springs and I agree. Idk if we will even bother with the fronts now. INSTALL TIPS: Installed myself, but very trick getting the technique down. After that it’s a piece of cake. I did the second spring in 2 minutes. Leave the spring in the hot sun or drop the top part into boiling water for 5 mins. This will make the rubber lip more mailable. Use a pry tool to pull the lip down and a flat head screwdriver to push up the end in. Opposite forces will bend the lip into the groove. (2 hands needed)."
— Nicole, Verified Purchase of the Sumo Springs SSR-329-47
★ ★ ★ ★ ★
Sprinter Motovan, these are perfect for built out Van hauling bikes.
"Easy to install. Immediate difference when driving through wind and on bumpy roads."
— Michael T., Verified Purchase of the Sumo Springs SSR-329-47
Products In This Bundle
Supersprings Sumo Springs SSR-329-47
Supersprings Sumo Springs SSR-329-47
PRODUCT FEATURES
Attributes Type: Air Spring
Load Capacity: 2200 Pound
With Air Compressor: No
Color: Black
Quantity: Set Of 2
Material: Urethane
Mounting Type: Frame Mount
With Bellows: No
With Air Line: No
With Roll Plate: No
With Valve: No
Remote Type: Not Applicable
With Mounting Hardware: Yes
Estimated Install Time (Hours): 1
Other Features
Requires No Maintenance
Enhances Load Carrying Ability
2200 Pounds Capacity At 50 Percent Compression
Reduces And Stabilizes Sway
Improves Overall Driver Control And Ride Comfort
Compress Up To 80 Percent Of Original Height With Full Memory Rebound
One-Piece Unit Attached On One Side Used As A Replacement/Upgrade To Factory Bump Stops
Progressive Spring Rate
Made From Patented Micro-Cellular Urethane; Leak-Proof Air Spring